Weight Indicator “industrial scales”
May 10, 2009
The weight indicator standard function
ON/OFF function,Manual accumulation,Function selection during normal operation,Tare,Zero,Calibration,Clear memory,Unit of weighing kg and lb
- This weight indicator is simple operation
- Weighing up to 1:15,000 divisions
- Selectable digital filtering
- 0.8 inches LED
- RS-232C interface,RS-485 interface optional,baud rate continuous ASCII data output
- External power supply:230V(115V)AC,internal rechargeable 6V DC battery
- Dimensions:256mm wide x 165mm high x 130mm deep
Weighing Indicator For Heavy Duty Industrial Scale
May 10, 2009
Weighing Indicator standard function Zero,vehicle,calibration,tare,store,clear,date/time,gross/net,zero,statistics,printing,A/D counts,LED show
Changing an indicator without recalibration
Display,store and recall vehicle number and tare
Printing can be done from an external parallel port 24-PIN dot matrix printer or from the optional build-in micro-printer
Statistics by daily reports and monthly reports,records by total weight,by vehicle number,and by goods number
RS-232 interface
RS-485 interface is optional
Weighing Indicator With Printer Function
May 10, 2009
Weighing Indicator with Printer function:
1.Able to setup zero(auto/manual) range
2.Save accumulation result manually
3.Weighing data save protection in case of power off
4.Able to print weighing records auto/manual
5.Standard RS232C communication interface with selectable baud rate and communication method
6.Standard scoreboard interface serial sending signal by current loop
7.AC power supply only
8.With built in micro printer
MAIN TECHNICAL PARAMETER
- A/D conversion method:Double integral
- A/D conversion speed: >5 times/sec
- Input sensitivity:>1µV/e
- Input signal:1mV–24mV
- Power supply:AC 187-242V,49-51Hz
- Load cell excitation:DC 12V
- Max.connection number of load cell:4 at 350 ohm
- Load cell connection mode:4 wire
- Verified counts:3000
- Division:1/2/5/10/20/50/100 optional
- Display:7bits LED,7 status indications
- Display range:-99990-99990(d=10)
- Clock:software clock,clock data lose on power off
- Communication interface(RS232 C standard),serial communication,with selectable baud rate by continuous sending method or on command method
- Transmission distance:RS232C<30 meters,Baud rate:600/1200/2400/4800/9600
- Scoreboard interface(Standard):serial sending signal by current loop with baud rate 600.transmission distance>50m
Weighing Indicator “Weighbridge”
May 10, 2009
The weighing indicator can be used for various electronic platform scales,truck scales and weighbridges system
Be capable of displaying millivolt signal, and easy to detect whether the sensor is in good condition or not Filtering Progression Adjustment (Grade 1-4)
Unique Stabilization Control Procedure
Automatic Switching in 3 Graduations
No re-scaling is needed during instrument changing
Tare Weight Storage for 512 Car Numbers
Storage and Printing for 1521-group Weighing Records
Functions of Enquiry,Report and Accumulative Printing
20mA Current Loop and RS-232C Serial Communication Interface
Baud Rate 1200/2400/4800/9600 (optional)
Anti-static electricity design was adopted for all interfaces to avoid damage
3-level Timing Power Off
AC/DC,can be external connected with 6V battery
Main Technical Index
-
- Range of Input Signal:-18~+18mV
- A/D Conversion:24-bit Sigma-Delta A/D Conversion
- A/D Sampling Frequency:38.400 kHz
- Nonlinearity:<0.0015% F.S.
- Gain Error Drift:0.5ppm/’C
- Minimum Resolution:0.1uV/d
- Supply Voltage: 5V/200mA (can connect 16 sensors)
- Operating Temperature:-10~+50′C
- Storage Temperature:-40~+85′C
- Relative Humidity:<90%R.H
- Power Supply:AC187~242V,49~51Hz or DC6V
- External Dimension:325×210×205 (mm)
Beam Load Cell “truck scale”
May 10, 2009
The beam load cell has been specifically designed for use in a wide range of weighing applications;including weighing system,truck scales,weighbridge etc
Main Technical Index
Rated Load Option:5T,10T,15T,20T,30T,40T,50T
Operating Temp Range:-30~+70
Sensitivity:2.0±0.002mV/V Safe load limit:150% F.S
Total error:±0.02%F.S; ±0.03%F.S Over load limit:300% F.S
Creep(30min):±0.02%F.S Recommend excitation:10~12V DC
Zero balance:±1%F.S Maximum excitation:15V DC
TCO:±0.02%F.S/10 Protection Class:IP67
TC SPAN:±0.02%F.S/10 Construction:Alloy steel
Input resistance:750±10 Ohm
Output resistance:703±2 Ohm
Insulation resistance:>5000M Ohm Diameter:6mm
Cheap Crane Scale,Capacity From 1 Ton to 20 Ton
May 9, 2009
30mm (1.2 inches) LED display,Hold function
Gross/net weight display convertible
Kg/lb units conversion,Weight accumulation function
Auto overload alarm at 100% FS +9e,Auto shut function
Remote control calibration,Easy to replace battery
AC/DC power adaptor: output 9V DC/1.5A
6V/10Ah rechargeable scaled lead-acid battery
Accuracy Class:OIML class III
Tare range:full capacity
Zero range:4% maximum capacity
Maximum safety load:125% maximum capacity
Ultimate load:400% maximum capacity
Remote control distance:›10m
Size and Capacities
| Model | Capacity (ton) |
Graduation (kg) |
N.W(KG) |
|
OCS-A-1000
|
1 T
|
0.2kg
|
12kg |
|
OCS-A-2000
|
2 T
|
1kg
|
12kg |
|
OCS-A-3000
|
3 T
|
1kg
|
14kg |
| OCS-A-5000 | 5T | 2kg | 24kg |
| OCS-A-10000 | 10T | 5kg | 44kg |
| OCS-A-15000 | 15T | 5kg | 60kg |
| OCS-A-20000 | 20T | 10kg | 66kg |
Heat Proof Crane Scales
May 9, 2009
——————————————————
For metal casting.high temperature factory
30mm(1.2″) LED display
Utmost load:600% F.S.
HOLD function
Gross/Net weight display convertible
Weight accumulation function
Auto overload alarm at 100%F.S.+9e
Auto shut function
Remote control calibration
AC/DC power adaptor:output DC9V/1.5A
6V/10Ah rechargeable scaled lead-acid battery
Remote distance:min.10m
——————————————————-
Accuracy Class OIML class
Tare Range Full capacity
Zero Range 4% Max. capacity
Max. Safety Load 125% Max. capacity
Ultimate Load 600% Max. capacity
Charger DC6V/10Ah
remote control distance:>10M
Size and Capacities
| Model | Capacity (ton) |
Graduation (kg) |
N.W(KG) |
|
OCS-G-1000
|
1 T
|
0.5kg
|
25kg |
|
OCS-G-2000
|
2 T
|
1kg
|
25kg |
|
OCS-G-3000
|
3 T
|
1kg
|
31kg |
| OCS-G-5000 | 5T | 2kg | 48kg |
| OCS-G-10000 | 10T | 5kg | 63kg |
| OCS-G-15000 | 15T | 10kg | 73kg |
Price Computing Bench Scale,Capacity From 30kg To 500kg
May 3, 2009
Price Computing Bench Scale/Counting Scale is designed for industrial or retail trade use
Dual functions of the counting and price computing,means while show the total weight
Optional LCD and LED
Accumulation function
AC/DC
Size and Capacities
| Capacity (kg) |
Graduation (g) |
Platform Optional Size(mm) |
|
30kg
|
2g
|
300mm*400mm |
|
75kg
|
5g
|
300mm*400mm |
|
150kg
|
10g
|
400mm*500mm |
| 300kg | 20g | 400mm*500mm |
| 500kg | 50g | 500mm*600mm |
Electronic Counting Scales
May 1, 2009
Features
- Rechargeable accumulator inside
- Auto zero-setting when switch on the scale
- Auto zero-tracing
- 1~100 times of accumulating
- Power supply:AC 220V (±10%) / 50 Hz,110V/60HZ,
- DC 6V/4Ah(Rechargeable accumulator inside)
Capacities and Size
|
Capacity
|
30kg
|
75kg |
150kg | 300kg |
| Division |
2g | 5g | 10g | 20g |
|
Pan size
|
300mm*400mm,400mm*500mm
500mm*600mm |
|||
Electronic Counting Scales
May 1, 2009
Features
- Interface RS232,Auto calibration,Auto zero tracking
- High accuracy load cell
- Capacity 1000g – 75t selectable
- LCD back light display
- Resolution:1/1,000 to 1/30,000 selectable
- Two power sources:rechargeable battery and AC adapter
- Power:110/220V AC (± 10%) + 6V DC/4AH
- Packing:93×46x24cm,Packing quantity:1
- Net weight:9.3kg,Gross weight:12kg
Capacities and Size
|
Capacity
|
30kg
|
75kg |
150kg | 300kg |
| Division |
2g | 5g | 10g | 20g |
|
Pan size
|
300mmX400mm,400mmX500mm
500mm*600mm |
|||