Crane Scales
July 20, 2009
| Features | Capacity*Readability | |
 |
OIML class III Display 30mm(1.2") 5 digits LCD Tare Range,Max.Safety Load:125% Operation time:60 hours min/100 hours max Charger:DC9V/1500mA net weight is 4kg,portable to move |
50kg*0.02kg
100kg*0.05kg 200kg*0.1kg 300kg*0.1kg 500kg*0.2kg 1000kg*0.5kg |
 |
OIML class
30mm (1.2-inch) LED Gross/net,Weight accumulation, Wireless interpolate:250 and 450MHz Distance of wireless transmission: >200 while no obstacleTare range Zero range:4% maximum capacity Maximum safety load:125% Battery working time:>50 hours |
10,000kg*5kg
20,000kg*10kg 30,000kg*10kg 40,000kg*20kg |
 |
OIML class
30mm (1.2 inch) LED display Hold function Gross/net weight display convertible Kg/lb units conversion Weight accumulation function Remote distance:10m Remote control distance:›10m |
1,000kg*0.5kg
5,000kg*2kg 10,000kg*5kg 20,000kg*10kg |
 |
OIML class 30mm(1.2″) LED,Utmost load:600% F.S. Gross/Net weight display convertible Weight accumulation function,Tare Zero Range 4% Max. capacity Max.Safety Load 125% Max. capacity Ultimate Load 600% Max. capacity Charger DC6V/10Ah remote control distance:>10M |
1,000kg*0.5kg 3,000kg*1kg 5,000kg*2kg 10,000kg*5kg 15,000kg*10kg |
Weight Indicators
July 18, 2009
Weight Indicators |
Features
|
 |
The weight indicator standard function ON/OFF function,Manual accumulation Function selection during normal operation and congfiguration,Tare,Zero,Calibration,Clear memory Unit of weighing kg and lb |
 |
Weighing Indicator standard function Zero,vehicle,calibration,tare,store,clear date/time,gross/net,zero,statistics,printing,A/D counts,LED show |
 |
Tare Weight Storage for 512 Car Numbers Storage and Printing for 1521-group Weighing Records Functions of Enquiry,Report and Accumulative Printing RS-232C,Anti-static electricity design AC/DC,can be external connected with 6V battery |
 |
Able to setup zero,Weighing data save protection in case of power off Able to print weighing records RS232C,standard scoreboard interface serial sending signal by current loop A/D conversion method:Double integral built in micro printer |
Portable Crane Scales
July 17, 2009
portable-crane-scale
30mm(1.2″) LCD display
Infrared remote controller,distance:20m
Hold,tare,accumulation,kg/lb conversion,gross/net conversion
Specification
Accuracy Class OIML Class III
Display 30mm(1.2″) 5 digits LCD
Tare Range:Full capacity
Stable Time:<10 seconds
Overload Indication:100% Max.capacity + 9e
Max.Safety Load:125% Max.capacity
Ultimate Load:400% Max.capacity
Operation time:60 hours min/100 hours max
Battery Type:Fully sealed lead-acid battery,6V/10Ah
Charger:DC9V/1500mA
Battery of Remote Controller:5# battery,1.5Vx2
| MODEL |
Capacity
(kg) |
Graduation
(kg) |
N.W(KG) |
| OCS-100-E | 100kg |
0.02kg | 4kg |
| OCS-200-E |
200kg
|
0.05kg
|
4kg |
| OCS-300-E | 300kg |
0.1kg | 4kg |
| OCS-500-E | 500kg |
0.2kg | 4kg |
Wireless Heavy Duty Crane Scale
July 17, 2009
wireless heavy duty crane scale
The Wireless Heavy Duty Crane Scale already passed OIML class III,capacity from 10Ton to 30Ton.appliance for heavy duty industrial.
—————————————————–
30mm (1.2-inch) LED display
Gross/net weight display convertible
Weight accumulation function
Auto overload alarm at 100% FS +9e
Wireless interpolate:250 and 450MHz
Distance of wireless transmission:
>200 while no obstacle
Tare range:full capacity
Zero range:4% maximum capacity
Maximum safety load:125%
Ultimate load:400% maximum capacity
Charger:DC9V/1500mA
6V/5Ah Ni-Ca scaled lead-acid battery
Battery working time:>50 hours
| MODEL |
Capacity
(Ton) |
Graduation
(kg) |
N.W(KG) |
| OCS-3-E | 3T | 1kg | 23kg |
| OCS-5-E | 5T | 2kg | 38kg |
| OCS-10-E | 10 T |
5kg | 50kg |
| OCS-15-E |
15 T
|
5kg
|
80kg |
| OCS-20-E | 20 T | 10kg | 85kg |
| OCS-30-E | 30 T | 10kg | 135kg |
Weight Indicator “industrial scales”
May 10, 2009
The weight indicator standard function
ON/OFF function,Manual accumulation,Function selection during normal operation,Tare,Zero,Calibration,Clear memory,Unit of weighing kg and lb
- This weight indicator is simple operation
- Weighing up to 1:15,000 divisions
- Selectable digital filtering
- 0.8 inches LED
- RS-232C interface,RS-485 interface optional,baud rate continuous ASCII data output
- External power supply:230V(115V)AC,internal rechargeable 6V DC battery
- Dimensions:256mm wide x 165mm high x 130mm deep
Weighing Indicator For Heavy Duty Industrial Scale
May 10, 2009
Weighing Indicator standard function Zero,vehicle,calibration,tare,store,clear,date/time,gross/net,zero,statistics,printing,A/D counts,LED show
Changing an indicator without recalibration
Display,store and recall vehicle number and tare
Printing can be done from an external parallel port 24-PIN dot matrix printer or from the optional build-in micro-printer
Statistics by daily reports and monthly reports,records by total weight,by vehicle number,and by goods number
RS-232 interface
RS-485 interface is optional
Weighing Indicator With Printer Function
May 10, 2009
Weighing Indicator with Printer function:
1.Able to setup zero(auto/manual) range
2.Save accumulation result manually
3.Weighing data save protection in case of power off
4.Able to print weighing records auto/manual
5.Standard RS232C communication interface with selectable baud rate and communication method
6.Standard scoreboard interface serial sending signal by current loop
7.AC power supply only
8.With built in micro printer
MAIN TECHNICAL PARAMETER
- A/D conversion method:Double integral
- A/D conversion speed: >5 times/sec
- Input sensitivity:>1µV/e
- Input signal:1mV–24mV
- Power supply:AC 187-242V,49-51Hz
- Load cell excitation:DC 12V
- Max.connection number of load cell:4 at 350 ohm
- Load cell connection mode:4 wire
- Verified counts:3000
- Division:1/2/5/10/20/50/100 optional
- Display:7bits LED,7 status indications
- Display range:-99990-99990(d=10)
- Clock:software clock,clock data lose on power off
- Communication interface(RS232 C standard),serial communication,with selectable baud rate by continuous sending method or on command method
- Transmission distance:RS232C<30 meters,Baud rate:600/1200/2400/4800/9600
- Scoreboard interface(Standard):serial sending signal by current loop with baud rate 600.transmission distance>50m
Weighing Indicator “Weighbridge”
May 10, 2009
The weighing indicator can be used for various electronic platform scales,truck scales and weighbridges system
Be capable of displaying millivolt signal, and easy to detect whether the sensor is in good condition or not Filtering Progression Adjustment (Grade 1-4)
Unique Stabilization Control Procedure
Automatic Switching in 3 Graduations
No re-scaling is needed during instrument changing
Tare Weight Storage for 512 Car Numbers
Storage and Printing for 1521-group Weighing Records
Functions of Enquiry,Report and Accumulative Printing
20mA Current Loop and RS-232C Serial Communication Interface
Baud Rate 1200/2400/4800/9600 (optional)
Anti-static electricity design was adopted for all interfaces to avoid damage
3-level Timing Power Off
AC/DC,can be external connected with 6V battery
Main Technical Index
-
- Range of Input Signal:-18~+18mV
- A/D Conversion:24-bit Sigma-Delta A/D Conversion
- A/D Sampling Frequency:38.400 kHz
- Nonlinearity:<0.0015% F.S.
- Gain Error Drift:0.5ppm/’C
- Minimum Resolution:0.1uV/d
- Supply Voltage: 5V/200mA (can connect 16 sensors)
- Operating Temperature:-10~+50′C
- Storage Temperature:-40~+85′C
- Relative Humidity:<90%R.H
- Power Supply:AC187~242V,49~51Hz or DC6V
- External Dimension:325×210×205 (mm)
Beam Load Cell “truck scale”
May 10, 2009
The beam load cell has been specifically designed for use in a wide range of weighing applications;including weighing system,truck scales,weighbridge etc
Main Technical Index
Rated Load Option:5T,10T,15T,20T,30T,40T,50T
Operating Temp Range:-30~+70
Sensitivity:2.0±0.002mV/V Safe load limit:150% F.S
Total error:±0.02%F.S; ±0.03%F.S Over load limit:300% F.S
Creep(30min):±0.02%F.S Recommend excitation:10~12V DC
Zero balance:±1%F.S Maximum excitation:15V DC
TCO:±0.02%F.S/10 Protection Class:IP67
TC SPAN:±0.02%F.S/10 Construction:Alloy steel
Input resistance:750±10 Ohm
Output resistance:703±2 Ohm
Insulation resistance:>5000M Ohm Diameter:6mm
Cheap Crane Scale,Capacity From 1 Ton to 20 Ton
May 9, 2009
30mm (1.2 inches) LED display,Hold function
Gross/net weight display convertible
Kg/lb units conversion,Weight accumulation function
Auto overload alarm at 100% FS +9e,Auto shut function
Remote control calibration,Easy to replace battery
AC/DC power adaptor: output 9V DC/1.5A
6V/10Ah rechargeable scaled lead-acid battery
Accuracy Class:OIML class III
Tare range:full capacity
Zero range:4% maximum capacity
Maximum safety load:125% maximum capacity
Ultimate load:400% maximum capacity
Remote control distance:›10m
Size and Capacities
| Model | Capacity (ton) |
Graduation (kg) |
N.W(KG) |
|
OCS-A-1000
|
1 T
|
0.2kg
|
12kg |
|
OCS-A-2000
|
2 T
|
1kg
|
12kg |
|
OCS-A-3000
|
3 T
|
1kg
|
14kg |
| OCS-A-5000 | 5T | 2kg | 24kg |
| OCS-A-10000 | 10T | 5kg | 44kg |
| OCS-A-15000 | 15T | 5kg | 60kg |
| OCS-A-20000 | 20T | 10kg | 66kg |